Your Position :
Home > Products > Grinding Machine

Clinker Grinding Unit

Traditional clinker grinding unit adopts ball mill to grind clinker, and has much dust, loud noise and high energy consumption in the process of production, it will be replaced gradually by vertical roller mill
Scope of application:
metallurgy, chemical, glass and other industries, in recent years, also used in the sand making industry for construction sand.
Share With:
Product Description
Traditional clinker grinding unit adopts ball mill to grind clinker, and has much dust, loud noise and high energy consumption in the process of production, it will be replaced gradually by vertical roller mill.
 
Clinker grinding processing: 
Clinker grinding is the stage in which the final product stage in cement production ,it is independent of each other. In this stage, the cement clinker is added with an appropriate amount of the mixed material ,it is be ground to produce finished cement.
 
The electric motor drives the disc through the reducer, and the hot air enters the vertical roller mill from the air inlet. The material falls from the feeding mouth to the center of the disc. Because of the centrifugal force, the material moves from the center of the disc to the edge of the disc. Grinding roller crushed, crushed material continues to move to the edge of the disc until the wind ring at the air flow away, and large particles of material and fell to the disc to continue to crush. The airflow through the upper part of the material separator, the role of the guide vane, the rough material from the cone down to the disc, the fine powder along with the air out of the mill, the dust collector system to be collected powder For vertical roller mill grinding out of the product. The material is dried in contact with the gas in the housing to achieve the desired dry and wet product. By adjusting the angle of the guide fan blades and the rotor speed of the separator, can achieve the required product thickness. 
Feature
●     1. Simple in technology process, saving capital construction investment.
●     2. Low failure rate, high operation efficiency, save land resources effectively.
●     3. Low noise, and low dust.
●     4. Noise of vertical roller mill is generally around 80 Db in the process of operation. 
Table Parameters
Specification RMS53.41 Vertical mill RMS46.41 Vertical mill RMS33.31 Vertical mill
Annual capacity (t) 1,000,000 600,000 300,000
Designed capacity (t/h) 150 90 45
Feeding capacity (t/h) 188 125 65
Actual capacity (t/h) 160 105 55
Finished product fineness (cm²/g) 500 500 500
Power consumption/unit (KWh/t) 26.5 28.5 30
System power consumption (KWh/t) 35 37 42
Coal consumption (kg) 17 18 18
Metal recovery rate per ton of slag powder (%) 0.2-0.3 0.2-0.3 0.2-0.3
Service Support

 
- 48-hour idling test machine before leaving the factory.
 
- You can take the materials to the factory test machine.
 
- We will customize the solution according to your needs.
yuanli
Inquiry
Please feel free to submit your inquiry information to us. We will contact with you as soon as possible.
Name:
* Country:
* Email:
Phone:
* Inquiry:
Related Products
Whatsapp
Tel
Message Top