Your Location : Home > > Products > > Ore Processing Machine > > Disc Feeder
Disc Feeder

Disc Feeder

Introduction:Disk Feeder is a cubage measuring feeding equipment; it supplies materials to the next procedure evenly and continuously; at the same time, it can bear relatively higher pressure. Disc feeder is applicable for feeding powdery ore material less than 20mm.

Disc Feeder Overview

The Description of Disk Feeder

Disk Feeder is a cubage measuring feeding equipment; it supplies materials to the next procedure evenly and continuously; at the same time, it can bear relatively higher pressure. It is a fine powdery material feeder suitable for non-cohesive materials like coal powder, cement, chamotte, limestone, shale, gangue and clunch. It is widely used in gold concentrator, coal mine, chemical plant, construction and foundry for quantitative and even feeding.

Disc feeder is applicable for feeding powdery ore material less than 20mm.

Disc feeder is composed of driving device, feeder unit, belt conveyor for metering use and metering device. Feeder and belt conveyor are drived by a set of driving device. The driving device's electromagnetic clutch can switch off or switch on the feeder. There is speed inspecting device to test the belt conveyor speed which shall be less than 1m/s, and measuring bar to adjust the weighing roller's position to prevent deflection.

The Advantages and Benefits of Disk Feeder

1. Simple structure, easy-to-adjust and excellent in performance.

2. Disk Feeder is suitable for conveying of materials with granularity less than 50mm,

3. Easy-to-flow or hard-to-flow materials.

Technical parameters of disc feeder

Model Form Disc diameter (mm) Capacity (m3/h) Disc rotation speed (r/min) Material size (mm) Motor (kw)
HJ-600 Seat-cover type Ø600 0.69-3.9 8 25 Y90L-4 1.1KW
HJ-800 Seat-cover type Ø800 1.6-7 8 40 Y90L-4 1.5KW
HJ-1000 Seat-cover type Ø1000 4.2-12 8 50 Y100L-4 2.2KW
HJ-1200 Seat-cover type Ø1250 6-15 7.5 50 Y112L-4 4KW
HJ-1500 Seat-cover type Ø1500 12-21 7.5 50 Y120L-4 4KW
HJ-2000 Seat-cover type Ø2000 18-32 7.5 50 Y132L-4 7.5KW

Send Inquiry

Hongji product inquiry or order requirements, Please enter your demand such as Raw material type, Capacity, Feeding material size, Final product size, etc. and we will contact you within one business day, and all your information is kept confidential and is not shared with any third parties. Email: info@hongjigroup.com

Product Name: *
Your Name:
Your Email: *
Your Phone: *
Message:
(as specific as possible)
Copyright © 2011 Hongji Mine Machinery.