Your Location : Home > > Products > > Dryer machine > > Bentonite Dryer
Bentonite Dryer

Bentonite Dryer

Introduction:The bentonite dryer machine (bentonite drying machine or bentonite dryin equipment) is made up of the drum device, front and back ring wheels, feeding in and out devices, transmission engine and gear cover.

Bentonite Dryer Overview

Bentonite is a kind of clay rock, which often contains a small amount of illite, kaolinite, chlorite, zeolite, quartz, feldspar and calcite. It is usually in white and pale yellow color, due to the changes of iron content; it is easy to become light gray, light green, pink, brown red, brick red, black, etc. The drying of bentonite always adopts bentonite dryer, which can process a large quantity of materials. Bentonite dryer has reliable running, flexible operation, strong adaptability, large capacity and strong adaptability, which is suitable for drying various materials with simple and reliable operation.

Characteristics of Bentonite Powder Rotary Dryer

1.The rotary dryer for bentonite powder has large processing capacity, less fuel consumption and low drying cost.

2. Bentonite dryer has high temperature resistance, which can use high-temperature hot air to quickly dry materials.

3. It has strong extensible ability. Its design fully considered production margin, there is no need to replace equipment even if the production increases slightly.


4. The bentonite rotary dryer uses self-aligning tug structure. Tug and rolling ring fit well, which significantly reduces abrasion and power consumption.

5. The specially designed gear wheel structure greatly reduces horizontal thrust brought by tilt work of equipment.

6. It has strong resistance to overload. Cylinder runs smoothly and has high reliability.

Bentonite Dryer Strcure

The bentonite dryer machine (bentonite drying machine or bentonite dryin equipment) is made up of the drum device, front and back ring wheels, feeding in and out devices, transmission engine and gear cover. Bentonite dryer is applied to dry many materials such as kaolin, bentonite, cement, mine and grain.


Bentonite Dryer Working Principle

Material fed into the bentonite dryer by feeding device, then lifted to a certain height by lifting plate installed in the dryer, and will be crushed by high-speed rotating blade when items falling down, repeat the process until materials be discharged through the discharge mouth. The hot air produced by the direct combustion hot blast stove enters into the kaolin dryer and makes full contact with the material, to dry the material rapidly, and then the dried material will be discharged through the conveyor installed at the discharge end of bentonite dryer. Staggered various lifting board with different perspectives are welded inside the kaolin drying machine from front to back. In order to prevent shuffling, door ring and spiral lifting board are designed at the feed end. Kaolin dryer is installed on the roller device through the front and rear bearing device, and the blocking-wheel on the rear wheel is designed to control the axial motion of the dryer. Kaolin drying machine rotation is driven by the gearing through the rotation of fixed gears on the dryer.

Send Inquiry

Hongji product inquiry or order requirements, Please enter your demand such as Raw material type, Capacity, Feeding material size, Final product size, etc. and we will contact you within one business day, and all your information is kept confidential and is not shared with any third parties. Email: info@hongjigroup.com

Product Name: *
Your Name:
Your Email: *
Your Phone: *
Message:
(as specific as possible)
Copyright © 2011 Hongji Mine Machinery.